Scraper winch should carefully read the "Instruction Manual" before use; the length of the wire rope should be such that the wire rope left on the reel is not less than 3 turns when the bucket is at the end position; the cover of the winch, such as the sealing device, should be kept intact to avoid The gravel ore particles enter the machine to accelerate the wear of the parts;
After the scraper winch motor is started, it is strictly forbidden to press the two control handles at the same time; often check the lubrication parts. If there is oil leakage or lack of oil, it should be repaired and replenished in time; the winch should be inspected once during normal work from 1300 to 1600; scraper winch reel The grooved wire rope must not exceed the rim. The winch has been lubricated before leaving the factory. It does not need to be refilled before use. After 120 hours of normal operation, the lubricating oil is replaced once.
