Any equipment needs to be inspected before use. It is very important to ensure safety. Underground Mining Winch is a commonly used equipment in mines. It is used in underground mining areas, coal bunkers and loading station dispatching rooms, and traction mine cars. Can be used for other auxiliary traction operations.
What are the pre-drive inspections for Shaft Sinking Winch?
(1) Check the Shaft Sinking Winch: The top support is firm and safe, with no abnormal changes; the distance from the winch to the track meets the vehicle traffic requirements; the operation space meets the operational requirements; and the work site is neat.
(2) Check Shaft Sinking Winch fixing: the foundation is stable, the anchor bolts are fully fastened, and the four pressures are complete and firm.
(3) Check that the Shaft Sinking Winch roller, bearing housing and retaining rope are in good condition.
(4) Check the Shaft Sinking Winch brake and working brake: the action is flexible, the brake is accurate, reliable, and there is no card phenomenon. All bolts, pins, shafts, tie bolts and limit bolts are complete and complete without bending or deformation. After the brake is applied, the position of the brake lever is between 60 and 70% of the total stroke. The brake belt is complete without fracture, and the residual thickness of the brake is not less than 4mm. The surface of the brake wheel is smooth and smooth, no obvious groove marks and no sludge.
