CONTACT US
  • Tel/Wechat/Whatsapp:+86-15376502829
  • Fix: +86-537-2350961
  • Email:cs@chinacoalintl.com
  • Address:No. 11, North of Kaiyuan Road, High-tech Zone, Jining City, Shandong Province, China
Position:Home  /  Industry Info  /  Underground Mining Winch Operational Safety Measures

Underground Mining Winch Operational Safety Measures

Date:2019-11-21     Label:

Underground Mining Winch

Mining Winch

Winch

First, work preparation:
 
  1.Unloadground The unloading locomotive under the Winch lane must be designated by experienced personnel. Participants are required to follow the instructions of the responsible person. The person in charge shall organize all construction personnel to study and implement, and recognize the relevant matters.
 
  2. According to the site situation of Underground Mining Winch, detailed inspection should be carried out before operation. The locomotive should not be super wide and super high. All tracks should be qualified, the fasteners should be fastened, the roadway should be unobstructed, and the locomotive connection device should be in good condition. On the locomotive and on the board. After the bolt is attached to the main shackle, it must be tied with a wire rope to prevent hooking the jump pin.
 
  3. Before the handling, the winch driver and the up and down signals shall be notified for the hook operation, and the transportation time, route and arrival position shall be clearly stated.
 
  Second, consider the locomotive under the Underground Mining Winch:
 
  1. Before the repair, the person in charge should check that the locomotive and its connecting device must be firm and reliable. The bolts must be tied with wire so that they cannot jump out and then come into contact with the upper and lower platform signal levers. The signal should be hooked onto the locomotive and carefully inspect its connection and, after confirmation, pass the Underground Mining Winch driver and other signal workers by telephone and then send a drive signal.
 
  2.Unloadground The unloading locomotive under the Winch lane must be opened with a special hook. It is strictly forbidden to hang other vehicles.
 
  3.Underground Mining Winch drivers must be highly focused on thinking, smooth operation and even acceleration. The running speed must not exceed 2 m / s.
 

  4. Strictly observe the underground transportation operation specifications. In the case of a downshift or other malfunction, the safety measures for handling the vehicle in the upper lane must be observed.

Underground Mining Winch Operational Safety Measures

+

+

Please leave a message
skype
message