The Mining Hoist Winch developed by the company Mining Hoist Winch is the same as the very popular products on the market, and many people choose to buy them. Although many people choose to buy Mining Hoist Winch, they still don't know about it. The daily inspection and maintenance of mining Mining Hoist Winch will be detailed later. All you have to do is find the answer and it will help you.
Check whether the signaling device and motor operation buttons are intact and the signal is clear and bright; otherwise, repair or replace it. Check whether the drum is damaged, whether the wire rope head is firmly fixed, whether the bearing is leaking oil, and whether the wire rope is arranged neatly. If you have any questions, please handle them in time. Inspect the brakes for damage and break the bolts, forks, brakes, pins, etc. Damage or deformation, and whether the rear nut is loose. Any issues should be adjusted and addressed.
Mining Hoist Winch has the characteristics of compact structure, small size, light weight and beautiful appearance. It has the characteristics of high safety, high efficiency, large starting torque, good stability at low speed, low noise, and reliable operation. Check that the top post and mast holding the Mining Hoist Winch are secure, the anchor bolts or anchor bolts are loose, and the foundation is cracked. If there are any problems, they should be dealt with in a timely manner. Check whether the motor starts normally with no load, whether the grounding is good, and whether electrical equipment such as starters meet explosion-proof and integrity requirements. Check whether the temperature of Mining Hoist Winch bearings, motors, switches, cables and brake bands is too high, find out the reasons and take measures.
When using Mining Hoist Winch, the main motor starts. The motor rotates through a high-speed coupling to transmit power to the high-speed shaft of the reducer. After the two-stage gear transmission is decelerated, the output shaft of the reducer is transmitted to the main shaft through a coupling. If the rotation of the motor is constantly changing, the troubleshooting method may cause the hoist to roll up or loosen the wire rope and the hoist, while lifting the container to move up and down in the wellbore. Welcome new and old customers to buy our products!
