CONTACT US
  • Tel/Wechat/Whatsapp:+86-15376502829
  • Fix: +86-537-2350961
  • Email:cs@chinacoalintl.com
  • Address:No. 11, North of Kaiyuan Road, High-tech Zone, Jining City, Shandong Province, China
Position:Home  /  Product Wiki  /  What Types Of Mining Hoist Winch Can Be Divided Into

What Types Of Mining Hoist Winch Can Be Divided Into

Date:2020-01-31     Label:

Mining Hoist Winch

Mining Winch

Winch

According to Mining Hoist Winch's non-use method in the climbing frame industry, three Mining Hoist Winch modes have been developed, namely, Mining Hoist Winch for hanging double hooks, Mining Hoist Winch for hanging loops, and Mining Hoist Winch for hanging loops. These three Mining Hoist Winch meet the application requirements of most of the climbing frames on the market.

Hanging double hook Mining Hoist Winch, each end of the chain is equipped with a lower hook. When the lower hook on the left lifts the weight to the upper limit position, the lower hook on the right just falls to the lowest end, and the right can be changed. The lower hook continues to lift. Thrifty saves time reversing the chain.
 
The suspension loop Mining Hoist Winch, the chain bypasses the Mining Hoist Winch crane wheel and the drop-point cruise ship to form a closed loop chain. Each side of the chain is equipped with a mid-section suspension point, and the mid-section suspension point A passes the wall support. The base is fixed to the wall, and the Mining Hoist Winch rotates counterclockwise. The Mining Hoist Winch rises with the scaffolding. When the floor is lifted, the drop point is close to the middle point A (limit position).
 
At this time, change the mid-section lifting point B to the higher wall attachment bracket and fix it, and continue to lift next time. It saves the time of reversing the rewinding chain. The upside-down loop Mining Hoist Winch, the chain bypasses Mining Hoist Winch's upper dio cruise ship and crane wheel, forming a closed loop chain. Each side of the chain is equipped with a mid-section lifting point. The hanging point A of the middle section is fixed to the wall through the wall support.
 
Mining Hoist Winch rotates counterclockwise, and Mining Hoist Winch rises with the lifting scaffold. After lifting one level, the nose is close to the mid-point suspension point A (limit position). At this time, the mid-section suspension point B and the higher level of the wall are changed. The wall bracket is fixed, and the next lifting is continued. Thrifty saves time reversing the chain.

+

+

Please leave a message
skype
message