The winch developed by mining winches are the same products that are very popular in the market, and many people choose to buy them. Although many people choose to buy winches, they still don't know much about winches. Then, the daily inspection and maintenance of mining winches will be introduced in detail. You only need to find out the answer, it will help you.
1. Check whether the signal device and the motor operation button are intact and there is no explosion, whether the signal is clear and bright, or it should be repaired or replaced.
2. Check whether the drum is damaged or broken, whether the wire rope head is firmly fixed, whether the bearing is leaking oil, whether the wire rope is arranged neatly, and if there is any problem, it should be dealt with in time.
3. Check whether the brake is cracked, whether the bolt, front fork, brake, pin, etc. are damaged or deformed, and whether the rear tightening nut is loose. If there are any problems, they should be adjusted and dealt with.
4. This series of winches has the characteristics of compact structure, small size, light weight and beautiful appearance. It has the characteristics of high safety, high efficiency, large starting torque, good low-speed stability, low noise and reliable operation.
5. Check whether the top column and mast of the fixed winch are firm, whether the anchor bolts or anchor bolts are loose, and whether the foundation has cracks. If there are any problems, they should be dealt with in time.
6. Check whether the no-load starting of the motor is normal, whether the grounding is good, and whether the electrical equipment such as the starter meets the requirements of explosion protection and integrity.
7. Check whether the temperature of bearings, motors, switches, cables, and brake belts of mine inverters is too high, find out the cause and take measures to deal with it.
When the winch is used, the main motor starts. The motor rotates through a high-speed coupling to transmit power to the high-speed shaft of the reducer. After the two-stage gear transmission decelerates, the passive shaft of the reducer is transmitted to the main shaft equipment through the coupling. If the steering of the motor is constantly changed, the troubleshooting method can make the reel entangle or loosen the wire rope, mine hoist, and at the same time, the lifting container moves up and down in the well.
