The mining scraper winch is mainly used for the handling and filling of underground or open pit ores in metal coal mines or other mines. Horizontal or inclined angle less than or equal to 44 degrees of the slope rake transport, but can not be used as lifting equipment.
Of course, the double drum hoist winch driver can also be manipulated by hand next to the winch, or with a distance of 1-10 metres from the winch with a button for distance operation, the parallel arrangement of the winch and the PB series of rake bucket rock loader host common.
The components of underground mining winch are different from other underground mining winch:Rope guiding device, manipulation device, deceleration device, the main drum, vice drum and motor.
These mining scraper winch parts are installed in the shell inside and outside, the shell is a good steel parts, have a good support and bear all the load. It is bolted to the two chutes connected to the foundation. Double drum winches have one main drum (mounted on the right side, i.e. the side near the motor) and one secondary drum (mounted on the left side).
The three-drum mining scraper winch has one main drum (mounted in the centre) and two vice-drums (mounted on the left and right). The three-drum winch can also be fitted with two main drums (mounted on the right and in the centre) and one vice-drum (mounted on the left), and each of these drums is correspondingly equipped with a steering device and a rope guiding device.
