1. Close the power switch, and turn on the operating power.
2. Test run
Release the working reel and the empty reel handle at the same time, press the start button, the motor starts running for 1-2 min, and observe whether the operation is normal.
3. Load operation
The control handle of the work reel ( right side, on the motor side) is braked, the handle of the empty reel ( right side) is released, and the electric load is operated.
After the work is over, put the bucket in a safe place. Release the two operating handles, press the stop button, stops the motor, pull down the power switch, and cut off the power.