1. After hearing signals, first turn on the red light to alert the pedestrians, then brake the brakes and release the working brakes to start the winch in the direction of the signal command.
2. Press the working brake lever slowly, and slowly release the brake brake lever to make the winch roller rotate slowly, accelerate the acceleration smoothly. Finally press the working brake lever to release the brake to reach the normal running speed.
3. The operator must operate behind the rope guard. It is forbidden for the operators to operate on the side of the winch or in front of the drum, and it is forbidden to drive with one hand and climb the rope with another hand.
4. When the mining vehicle is lowered, the operators should reverse the motor, and matched the hooking machine with the hook. The rope should not be loosened with the trolley, so as to avoid the car from changing the slope point. It is not allowed to run without electricity car.
5. In order to prevent the motor from burning, it is forbidden to break two brakes at the same time.
